WELLSYSTEM Medical_Plus, Руководство по эксплуатации, Страница: 113 / 144

Operation
03/2018 1009909-05 Operating instructions – 41/70
3.7.2 Free, specific programming
Up to 50 different steps can be defined for a massage program using this
programming mode. The specific step sequence can be defined in the path
displayed on the left. The right nozzle carriage is marked as (a) and the left
nozzle carriage is marked as (b).
The sequence can be programmed using the following buttons:
1. Right nozzle carriage moves outwards
2. Plus button: Nozzle carriage moves up to the head end;
Minus button: Nozzle carriage moves down to the foot end
3. Right nozzle carriage moves inwards
4. Left nozzle carriage moves inwards
5. Left nozzle carriage moves outwards
The right (a) and left (b) sides can be moved synchronously or differently. The
left and right nozzle carriage buttons must be pressed down together to move
the carriages synchronously. The position is displayed for checking purposes.
The massage pressure, speed and the time in seconds for the specific steps
can also be defined in addition to the sequence. When a time is set up it
means that the nozzles will stay in the same position for the defined period. If
the time is set to 000 then the nozzles will move straight on to the next step.
The maximum time setting for each step is 120 seconds.
The defined steps will run in sequence. The sequence will be repeated until
the entered massage time has expired.
An example program with 2 steps is shown below.
The St.01 display will alternate with the step duration (in seconds). The dis-
play will move onto the next step after a step has been saved.