WELLSYSTEM Medical_Plus, Руководство по эксплуатации

Страница: 106 / 144

Operation
34/70
3.4 Ending a massage
The massage will be terminated automatically after the set massage time has
expired. A flashing StOP sign will be shown in the display.
When the set massage time has expired, the nozzles move at high speed to
the head end and then change to a smoothing, final massage. The pressure
is reduced for the final massage. This pressure can only be changed by cus-
tomer service. The nozzles move once completely from the head end to the
feet end as for a full body massage.
The massage does not end until the nozzles stop at the end of the foot
and the display blinks at 0.00.
The final massage is omitted if a chip card is not being used. At the end of the
massage time, the nozzle carriage moves to the head end and comes to a
stop there.
3.4.1 Interrupting the massage
– Press the START / STOP button.
The massage pressure is considerably reduced. The nozzle carriage will
cover the shortest route to either the head or feet end of the massage device
and will continue to run there, but at reduced pressure.
Do not get off the massage device until the nozzle carriage has reached one
of the end positions. The massage time will keep running.
– Press the START / STOP button once again to restart the massage.
3.4.2 Terminating the massage before the time
has expired
– Press the START / STOP button and keep it pressed down for 3 sec-
onds:
The nozzle carriage will move up to the head end of the device and it will then
be switched off.
3.5 Service card
The service card (12668-..) is used to call up device information and for modi-
fying some default settings such as the water temperature – see Page 58.