56
Note:
For safety reasons, the PDA can only control
one pump at a time.
2.
Enter the New Pump Serial Number in the space
provided (Figure 74) using the onscreen keyboard.
Press the Back button to exit the keyboard and press
Continue. The PDA will attempt to connect to the
new pump. After the new pump has been activated,
the PDA will show a confirmation screen (Figure 75).
3.
From the confirmation screen (Figure 75), press the
Continue button.
4.
Holding the pump in the orientation shown in
Figure 77, press the Prime Reservoir button (Figure
76). The plunger will begin to move slowly. Continue
to press the button until you see a drop of insulin on
the needle tip (Figure 77). Now press Continue.
u u u u u u
Serial
Number
Figure 74
Figure 75
Figure 76
Figure 77
Needle Tip
Содержание MICRO-PUMP
Страница 1: ...INSULIN PUMP SYSTEM MANUAL ...
