Wellcraft 270 Coastal, Руководство пользователя

Страница: 59 / 121

Note: Storms and wave action can cause buoys to
move. You should not rely on buoys alone to
determine your position.
12.3 Pre-Cruise Check
Before Starting the Engines:
• Check the weather forecast and sea conditions
before leaving the dock. Decide if the planned cruise
can be made safely.
• Be sure all required documents are on board.
• Be sure all necessary safety equipment is on board
and operative. This should include items like the
running lights, spotlight, life saving devices, etc.
Please refer to Safety Equipment chapter for
additional information on safety equipment.
• Make sure you have signal kits and flare guns
aboard, and they are current and in good operating
condition.
• Be sure you have sufficient water and other
provisions for the planned cruise.
• Leave a written message listing details of your
planned cruise with a close friend ashore (Float
Plan). The float plan should include a description of
your boat, where you intend to cruise, and a
schedule of when you expect to arrive in the cruising
area, and when you expect to return. Keep the
person informed of any changes in your plan to
prevent false alarms. This information will tell
authorities where to look and the type of boat to
look for in the event you fail to arrive.
• Check the amount of fuel on board. Observe the
“rule of thirds”: one third of the fuel for the trip out,
one third to return and one third in reserve. An
additional 15% may be consumed in rough seas.
• Check the water separating fuel filters for water.
The engine fuel filters also should be checked for
leaks or corrosion.
• Turn the battery switches on.
• Check the bilge water level. Look for other signs of
potential problems. Monitor for the scent of fuel
fumes.
• Test the automatic and manual bilge pump switches
and high water alarm switches to make sure the
systems are working properly. This is particularly
important before running offshore.
59