WELDMAN
SEMI-AUTOMATIC LCD POWER MIG 210 MIG / MAG / MMA / TIG DC LIFT
Page 8
5. Screen welding parameters
5. Screen welding parameters
and) MIG / MAG
and) MIG / MAG
the operator can adjust the speed of feeding a wire (1) and welding voltage (3), the inductance (5) by pressing the knob and
rotating can change the underlying operating parameters: pre-gas and wire feed post gas, operation of the handle (2T / 4T /
welding point), set and save the operating parameters and settings spool gun for welding aluminum Green field indicates the
recommended range of welding current
b) TIG welding
b) TIG welding
the operator can adjust the welding current
c)
welding MMA
the operator can adjust the welding current, Arc Force
and Hot Start
6. Screen factory settings
6. Screen factory settings
It enables reading settings (language, parameters, brightness
information) and return to factory settings
7. alarm screen
7. alarm screen
inform the overloading and excessive temperature inside the welder.
The welding process is automatically stopped, but the fan will run.
When the temperature decreases, the screen turns off the alarm and
the welder is ready for use.
