WELDMAN
SEMI-AUTOMATIC LCD POWER MIG 210 MIG / MAG / MMA / TIG DC LIFT
Page 2
•
Weld containers or tubes which contain or contain liquid or gaseous combustible substances
•
Do not work on materials cleaned a chlorinated solvent, and does not store the device in the vicinity
•
Near the place of work to keep a fire extinguisher
ATTENTION:
In order to avoid tipping cylinder gas explosion or gas regulator should observe the following rules:
Overturning a gas cylinder may result in fatal accident
1. You should properly use gas cylinders.
1. You should properly use gas cylinders.
2. Using our recommended by us or gas reducers.
2. Using our recommended by us or gas reducers.
3. Please refer to the instructions for use reducers and properly apply it.
3. Please refer to the instructions for use reducers and properly apply it.
4. Attach the cylinder by means of a suitable belt or chain located on the equipment
4. Attach the cylinder by means of a suitable belt or chain located on the equipment
devices.
5. Keep the bottle away from heat sources and protect from direct exposure
5. Keep the bottle away from heat sources and protect from direct exposure
solar.
6. When opening the valve closer to the gas outlet face. Cut off the gas supply when the welder is not
6. When opening the valve closer to the gas outlet face. Cut off the gas supply when the welder is not
used.
7. Do not lean on the welding torch cylinder and do not touch the electrode to the cylinder
7. Do not lean on the welding torch cylinder and do not touch the electrode to the cylinder
ATTENTION:
Welding works are a source of potential danger to life and health:
•
Arc can cause damage to the eyes and skin.
•
Chips and welding fumes can cause eye damage or burns.
•
Noise can cause hearing loss.
In order to avoid injury to yourself and others nearby, it is necessary that the appropriate means of protection:
1. Wear safety glasses (the welding helmet) with appropriate lenses tinted with
1. Wear safety glasses (the welding helmet) with appropriate lenses tinted with
UV filter
2. Wear appropriate protective clothing,
2. Wear appropriate protective clothing,
3. Protection should be extended to other persons in the vicinity of the weld using shields
3. Protection should be extended to other persons in the vicinity of the weld using shields
curtains or non-reflective.
ATTENTION:
Welding fumes threaten the health:
1. Protection measures should be used to avoid the risk of soot or gases
1. Protection measures should be used to avoid the risk of soot or gases
2. Avoid breathing dust
2. Avoid breathing dust
3. Make sure that the welding work is adequate ventilation and that there are
3. Make sure that the welding work is adequate ventilation and that there are
appropriate means for the removal of welding fumes.
4. It should be kept in mind when working on materials, primary gases that arise as a result of their
4. It should be kept in mind when working on materials, primary gases that arise as a result of their
Evaporation are harmful to health.
5. Welder should work in the presence of another person in case of poisoning.
5. Welder should work in the presence of another person in case of poisoning.
II.
GENERAL CHARACTERISTICS:
This device series POWER MIG (from now on referred to as welder) was made on the basis of inverter technology, using IGBT components.
Welder is designed for welding methods:
1) MIG / MAG
1) MIG / MAG
2) FLUX
2) FLUX
3) TIG DC LIFT
3) TIG DC LIFT
4) MMA
4) MMA
