Welch Allyn Micro Tymp 1, Руководство по обслуживанию

Страница: 27 / 82

Section 3.1 Service
M I C R O T Y M P 1 T R O U B L E S H O O T I N G
INSTRUMENT: PRINTER FOR MICROTYMP 1
MODEL #: 71130
PROBLEM: CAUSE: ............................. CORRECTIVE ACTION:
1. DOES NOT POWER
UP ( NO GREEN LIGHT )
*OPEN FUSE ...................... *VERIFY / REPLACE FUSE
*DEF. TRANSFORMER .... *REPLACE TRANSFORMER
2. PRINT-OUT TOO
LIGHT OR DARK
*CONTRAST SETTING
OUT OF SPEC ..................
*RESET CONTRAST TO SPEC.
3. DEFECTIVE PRINT *DEF. PRINT-HEAD .......... *REPLACE PRINT-HEAD
*DEF. PLATEN BAR ......... *REPLACE PLATEN BAR
4. PRINTOUT READS
“NO HANDLE”
*DIRTY WELL CONTACTS *CLEAN CONTACTS
*DEF. CONNECTING
CABLE...............................
*REPAIR CABLE
5. PAPER DOES NOT
FEED
*PAPER JAM ...................... *CLEAR AND RESTORE
PAPER
*COLD SOLDER JOINT
AROUND RESET
CONTROLLER .................
*REFLOW SOLDER JOINT
*DEF. FEED BUTTON ...... *REPLACE BUTTON
6. NOISY PRINTER *MIS-ALIGNED GEARS
ON MODULE ....................
*RE-ALIGN GEARS
*DEF.PRINTER MODULE *REPLACE MODULE
7. DOES NOT PRINT *PAPER IN BACKWARDS *INSTALL PAPER
CORRECTLY
END PRINTER TROUBLESHOOTING
pg 23