Welbilt Merrychef eikon e1s, Руководство пользователя

Страница: 32 / 148

32
eikon e1s
Service and repair guide
Potential risks during installation and setting up
Risk of injury from lifting heavy weights incorrectly
When lifting the appliance, the weight of the appliance may lead to injuries, especially in the torso are. To avoid this:
• Use a fork-lift truck/pallet truck to move the appliance.
• Use suitable lifting gear.
• When lifting the appliance, use enough people for the weight of the appliance (value depending on age and
gender). Observe the local occupational safety regulations for lifting and carrying.
Risk of body parts being crushed when moving and setting the appliance down
To avoid crushing body parts, ensure these instructions are followed:
•
Use suitable handling gear
•
Move the appliance slowly and carefully, and secure it against tipping over
•
Make sure centre of gravity is balanced and avoid jolts
•
Ensure the supporting surface meets the requirements specified above
Risk of cuts from sharp edges
To avoid cuts, ensure personal protective equipment is used and exercise caution when handling sheet-metal parts.
Risk of trapping fingers or body in mechanical parts of the appliance
To avoid this risk, when opening or closing the door, ensure that the handle is used and keep clear of the door hinges.
Risk of electric shock from live electrical parts
Live electrical parts are to be found under covers, under the operating panel, along the mains power lead and on metal
parts adjacent to the appliance. As such, work on the electrical system must only be performed by qualified electricians (as
per EN50110-1 in EU or equivalent) from an authorized service company. To avoid risk:
•
The appliance must not be installed or operated outdoors.
•
The electrical supply must be connected in accordance with applicable local and national regulations and
regulations of the professional associations and of the relevant power supply company.
•
Ensure that all electrical connections are in perfect condition and fixed securely.
•
Make sure that the appliance is connected to an equipotential bonding system (EU).
•
If two microwave combination ovens are installed in a stacking kit, both cases of the appliances and the stacking kit
itself must be grounded in a suitable manner and connected to an equipotential bonding system.
•
For microwave combination ovens on a wheeled platform, the length of the mains power lead must accommodate
the degree of movement allowed to the appliance by the retaining device on the wheeled platform. When moving
the assembly (platform plus appliance), never place the mains power lead under tension.
• All electrical connections must be checked when the appliance is prepared for first-time use to ensure cables are
laid correctly and connections are made properly.