5.4.5 Emptying and Cleaning the Grease Collection Canister (ConvoGrill Only)
For your safety when working with/on the combi oven
Before starting work, read and understand the rules, risks, and hazards specified in the 'For Your Safety on page 17' section
and in these instructions and follow all the corresponding instructions without exception.
Handling pumped-out grease / used grease
■
Used oil and used grease must be disposed of in compliance with the relevant country-specific laws and regulations, as
well as in compliance with all applicable rules and regulations set forth by the relevant local disposal companies and
authorities.
■
Do not pour used grease or used oil down the drain and into the sewer system.
■
Do not use pumped-out grease / used grease to prepare meals.
■
Collect used grease in appropriate containers and take it to the appropriate facility.
■
The company operating the combi oven must brief all staff accordingly.
Required tools
■
Large bottle brush
■
Common household dishwashing liquid
■
Container suitable for pumped-out grease (capacity >> 2.5 gallons)
Grease collection canister characteristics
Do not use any grease collection canisters other than the one included, as the included canister's material is designed to
meet the requirements involved in holding hot grease.
Emptying and Cleaning the Grease Collection Canister
1.
Remove the screw closure (1) with the connected tube from the
grease collection canister (2).
2.
Place the screw closure (1) with the connected tube – with the opening
facing upward – in the forked holder (3). This will prevent grease from
flowing out and falling onto the floor, creating a slip hazard.
3.
When handling the grease collection canister (2), make sure that no
grease falls onto the floor, creating a slip hazard. This is especially im-
portant when moving the grease collection canister (2) while it is full
and open.
Pour the pumped-out grease from the grease collection canister (2) in-
to the container for pumped-out grease. To do so, tip the grease col-
lection canister (2) gradually in order to prevent the grease from slosh-
ing.
4.
Clean the inside of the grease collection canister (2) with cleaning
agent, plenty of hot water, and the bottle brush.
5.
Rinse the grease collection canister (2) with water and let the water
drip out fully.
6.
Screw the screw closure (1) with the connected grease management
tube back onto the grease collection canister (2).
7.
Place the grease collection canister (2) in an upright position on a flat,
level surface next to the unit. The canister's (2) supporting surface
must not be more than 6" above the contact point between the unit
and its base. The operator's working area must be kept clear.
5 How to Clean the Combi Oven
Operating Manual
95