WMS-100 104193 V2.7 - 14.10.2019
Installation
Disposal
Electrical connection
Before connecting ensure that the mains voltage is the
same as indicated on the device's type plate.
Incorrect electrical connection can cause damage to the
tank control and to the equipment.
The mains voltage should not be switched on until all
components including the sensor are connected.
No appliances with current levels in excess of the maxi-
mum values indicated on the relays should be connected
to the relay contacts
Use contactors.
Downstream contactors must be fitted with an RC protecti-
on circuit. (see also page 36).
You will find the circuit diagram for your tank control on the back of the
housing above the connection terminals.
For the purposes of disposal, the device is classified as waste electronic
equipment within the meaning of European Directive 2002/96/EC
(WEEE) and must not be included with household waste. It must be
disposed of through the correct channels.
Local and current legislation must be observed.
Page 7
