WEIHONG NCStudio V12, Руководство пользователя

Страница: 29 / 48

上
海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
29 / 47
Example
In the figure below, the two shooting points are horizontal in X-axis direction with
40mm distance and the first shooting point is set as workpiece origin:
Thus, the position of the second point is (X40, Y0).
After setting, click Template Edit . Outline Positioning dialog box pops up. For
details, please refer to Edit a Template .
Shoot by Three Points
With this shooting method, the three points must form a right triangle. And when
programming, you need to set the center point of the hypotenuse as the workpiece
origin.
To shoot by three points, do the following:
1. Switch to Param page and set the parameter CCD Shoot Mode to 3 .
2. Move X-axis and Y-axis to the position of the first shooting point and click Pick
Current under Mark 1 .
3. Move X and Y axes to the position of the second shooting point and click Pick
Current under Mark 2 .
4. Move X and Y axes to the position of the third shooting point and click Pick
Current under Mark 3 .
After setting, click Template Edit . Outline Positioning dialog box pops up. For
details, please refer to Edit a Template .