上
海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
28
/
47
Shoot by Single Point
When programming, you need to set the circle center as the workpiece origin. After
shooting, the system will set the found center as the workpiece origin.
This operation is suitable to process circles.
To shoot by single point, do the following:
1.
Switch to
Param
page and set the parameter
CCD Shoot mode
to
1
.
2.
Move to the circle center and click
Shoot
to record the position of the shooting
point.
After setting, click
Template Edit
.
Outline Positioning
dialog box pops up. For
details, please refer to
Edit a Template
.
Shoot by Two Points
With this shooting method, the positions of the shoot points are the theoretical
position on the drawing.
To shoot by two points, do the following:
1.
Set the workpiece origin and the first shooting point:
It is recommended to do the following:
1.
Switch to
Craft
page and check
Setting ON
and
Set Work Zero by CCD
Center
.
2.
Move X-axis and Y-axis to the position of the first shooting point, and
click
Clear
→
X
and
Y
.
3.
Switch to
Set
page and click
Pick Current
under
Mark 1
.
At this time, the position of the first shooting point is the workpiece
origin.
2.
Switch to
Param
page and set the parameter
CCD Shoot Mode
to
2
.
3.
Set the second shooting point under
Mark 2
.
It is recommended to manually input the position of the second shoot point,
according to the distance between the two shooting points.
