上
海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
20
/
47
3.5.
Manual Control Area
In this area, you can control axis movement and select feed mode:
1.
Axis direction buttons: used to move each axis towards positive or negative
direction:
–
Only click an axis button. The axis moves at jogging speed.
–
Click an axis button after clicking
Rapid
. The axis moves at rapid jogging
speed.
2.
Mode buttons: used to select feed mode:
–
Jog mode
Press an axis direction button and
Jog
. The machine tool keeps running
until you release the button.
–
HW mode
The machine tool is controlled by handwheel.
–
Stepping mode
Click an axis direction button and
0.1
,
1
or the left yellow area on
button
>>10
. The machine moves 0.1mm, 1mm or a customized step
size separately.
Click the right grey area on button
>>10
,
Stepsize
dialog box pops up
and you can customize the step size.
The customized step size should not be too large to avoid damage from
misoperation. And its default value is 10mm(inch).
Note:
Please do not click frequently, for the system needs a certain time to execute the
command.
