User Manual Managed Switches
56
Type
Setting
Description
Factory
Default
Network / Host
Display the type of pool.
Network: The pool defines a pool of IP addresses to
service more than one DHCP client.
Host: The pool services for a specific DHCP client
identified by client identifier or hardware address.
If ‘-‘ is displayed, it means not defined.
‘-‘
IP
Setting
Description
Factory
Default
IP network
address
Display the network number of the DHCP address
pool.
If "-" is displayed, it means not defined.
‘-‘
Subnet Mask
Setting
Description
Factory
Default
Subnet mask
Display the subnet mask of the DHCP address pool.
If "-" is displayed, it means not defined.
‘-‘
Lease Time
Setting
Description
Factory
Default
Time in days /
hours / minutes
Display the lease time of the pool.
1 day
3.5.1.3 DHCP Server Excluded IP Configuration
This page configures excluded IP addresses. DHCP server will never allocate these IP addresses to
DHCP clients.
IP Range
Setting
Description
Factory
Default
Range of IP
addresses
Define the IP range to be excluded IP addresses. The
first excluded IP must be smaller than or equal to the
second excluded IP. BUT, if the IP range contains only
1 excluded IP, then you can just enter it in any of the
fields (or in both).
None
