Show or hide content
All entries that are marked with a square plus symbol can be
opened and the content displayed with a single mouse click.
Showing content
Conversely, content can be hidden by clicking on the square
minus symbol.
Hiding content
Tracking changes
Any settings changed will be marked with a green symbol.
Changes marked with symbol
In this state, you can revert each individual change that has
not yet been accepted by the module back to its original set-
ting. All changes are only accepted when you click on
Apply
changes
. All changes are reset when you click on
Restore
.
Once you have applied or restored the changes, the markers
will be removed.
Setting the language
▶
To change the language, click on
Language
in the menu
bar and then on the required setting.
Setting the language
Entering a password
Access to the following functions is restricted by means of
password protection:
–
Changing parameters
–
Operating the module in Force mode
–
Downloading firmware updates
–
Changing a password
Users without a user ID have read-only rights, but no write
access. They cannot use the specified functions. A password
is requested the first time an attempt is made in a session to
access these functions.
▶
Enter the username and password and confirm by click-
ing on
OK
Entering the username and password
In the original state as at delivery, the login credentials are as
follows:
User name:
admin
Password:
Detmold
10 Web server
| Getting to know and arranging the web server
38
2484940000/00/02.2017
Manual UR67-Multiprotocol
