Weidmuller IE-SW-VL08M Series, Руководство пользователя

Страница: 35 / 107

IE-SW-VL08M Series User’s Manual Featured Functions
3-19
Trap Settings
SNMP traps allow an SNMP agent to notify the NMS of a significant event. The IE-SW-VL08M
supports two SNMP modes,
Trap mode and Inform mode.
SNMP Trap Mode
In Trap mode, the SNMP agent sends an SNMPv1 trap PDU to the NMS. No acknowledgment is
sent back from the NMS so the agent has no way of knowing if the trap reached the NMS.
SNMP Inform Mode
SNMPv2 provides an inform mechanism. When an inform message is sent from the SNMP agent to
the NMS, the receiver sends a response to the sender acknowledging receipt of the event. This
behavior is similar to that of the get and set requests. If the SNMP agent doesn’t receive a response
from the NMS for a period of time, the agent will resend the trap to the NMS agent. The maximum
timeout time is 300 sec (default is 1 sec), and the maximum number of retries is 99 times (default is
1 time). When the SNMP agent receives acknowledgement from the NMS, it will stop resending the
inform messages.
1
st
Trap Server IP/Name
Setting Description Factory Default
IP or Name
Enter the IP address or name of the 1
st
Trap
Server used by your network.
None
1
st
Trap Community
Setting Description Factory Default
Character String
Use a community string match for
authentication (maximum of 30 characters).
Public
2nd Trap Server IP/Name
Setting Description Factory Default
IP or Name
Enter the IP address or name of the 2
nd
Trap
Server used by your network.
None
2nd Trap Community
Setting Description Factory Default
Character String
Use a community string match for
authentication (maximum of 30 characters).
Public