WeiderPro 831.14933.0, Руководство пользователя

Страница: 12 / 24

12
12
13
12. Route the Short Cable (31) over a Pulley (32).
Attach the Pulley (32) inside the Center Frame
(7) with an M10 x 55mm Bolt (40), two M10
Washers (55), two Pulley Bushings (38), and an
M10 Locknut (47).
Make sure to leave slack in the Short Cable
(31) in the indicated location.
47
40
55
55
31
Slack
31
31
50
10
32
32
33
34
35
35
47
46
38
38
7
13. Insert a Pulley (32) into the loop of the Short
Cable (31) as shown.
Orient two Pulley Plates (34) as shown.
Using the first hole in the Pulley Plates (34),
attach two Half Guards (35), the Pulley Plates,
and a Cable Trap (33) to the Pulley (32) with an
M10 x 50mm Bolt (46) and an M10 Locknut (47).
Make sure that the Cable Trap (33) is oriented
to hold the Short Cable (31) in the groove of
the Pulley (32).
14. Attach the end of the Short Cable (31) to the
Weight Carriage (10) with an M10 x 15mm
Screw (50).
14