6
2.
Insert two M10 x 65mm Carriage Bolts (83) up
through the Center Base (2). Place a piece of
tape over the bolt heads to hold them in place.
Attach a Base (1) to the Center Base (2) with two
M10 x 93mm Button Bolts (97), an M10 Split
Washer (93), two M10 Washers (84), and an M10
Nylon Locknut (79).
Do not tighten the Bolts.
Attach the other Base (not shown) to the
Center Base (2) in the same manner.
3.
Attach the Backrest Upright (8) to the Center
Base (2) with the indicated two M10 x 65mm
Carriage Bolts (83) and two M10 Nylon Locknuts
(79).
Do not tighten the Locknuts.
83
2
79
97
84
93
2
3
1
8
79
79
2
83