12
24. Wrap the High Cable (73) over a 90mm Pulley
(58) and over the indicated rod in the Top Frame
(16). Attach the Pulley to the Top Frame with an
M10 x 42mm Button Bolt (96) and an M10 Nylon
Locknut (79).
26. Attach the High Cable (73) inside of the Weight
Carriage (41) with an M10 x 67mm Button Bolt
(90), two M10 Washers (84), two 24mm Spacers
(45), and an M10 Nylon Locknut (79).
27. Locate the Low Cable (72). Route the Cable
through the Backrest Upright (8) and under a
110mm Pulley (59). Attach the Pulley inside of the
Upright with an M10 x 93mm Button Bolt (97),
two M10 Washers (84), two 25mm Spacers (55),
and an M10 Nylon Locknut (79).
25. Wrap the High Cable (73) over a 90mm Pulley
(58). Attach the Pulley to the Top Frame (16) with
an M10 x 42mm Button Bolt (96) and an M10
Nylon Locknut (79).
79
96
16
24
25
90
84
45
73
26
27
79
84
41
45
79
96
16
58
73
97
84
55
72
55
59
84
79
8
23. Wrap the High Cable (73) under a 90mm Pulley
(58). Attach the Pulley, a Small Cable Trap (63),
and two Half Finger Guards (40) to the two Pulley
Plates (74) with an M10 x 53mm Button Bolt
(147) and an M10 Nylon Locknut (79).
Make sure
that the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
23
147
40
40
79
74
74
58
63
73
73
58
Rod