Weichai America Corp.
10
1 front cover 2 Pin 3 Hex flange bolts
Figure 2-4 Exploded view of front cover
2.3.2 Preparation before disassembly
1.
Equipment conditions: Socket wrench
2.
Preparation before disassembly: Remove the front attachment
2.3.3 Dismantling
1.
Remove the front cover fastening bolt;
2.
Remove the front cover;
3.
Remove the front cover seal.
2.3.4 Assembling
The front cover assembly procedure is the opposite of the front cover removal procedure.
2.3.5 Service Key point
1.
After the front cover is removed, it should be placed in a clean environment. Before assembly,
it is necessary to check whether the inside of the front cover has greater dirt to ensure the
front cover is tidy.
2.
Before assembling the front cover, apply the sealant on the bonding surface of the body, and
the glue line should be continuous.
3.
Check the seal for damage, if damaged need to be replaced with new parts. When assembled,
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
