Weichai America Corp.
51
1, air filter; 2, air filter bracket; 3 & 9, hexagonal flange bolt; 4 & 8, clamp; 5, adapter; 6, pressure
sensor 7, intake manifold
Figure 6-1 Exploded view
6.1.2 Preparation before disassembly
1.
Equipment conditions: pneumatic wrench, sleeve
2.
Disassembly Preparation: Remove the other peripherals installed on the air filter.
6.1.3 Dismantling
The disassembly sequence is the opposite of the installation sequence.
6.1.4 Installation
1.
Secure the air cleaner (1) to the air cleaner bracket (2) with hexagonal flange bolts (3) and
tighten it with a wrench.
2.
Secure the air cleaner bracket and air cleaner to the flywheel housing with hexagonal flange
bolts (9) and tighten them with a wrench.
3.
Connect the air cleaner to intake manifold (7) with clamp (8) and tighten it with wrench.
6.1.5 Air filter in the course of maintenance and precautions:
1.
The air filter cartridge must be regularly cleaned and inspected. When cleaning the air filter
element, gently tap the end face of the filter element on the flat plate and blow it back out of
the filter element with compressed air for maintenance. No oil, water cleaning.
2.
If equipped with filter plugging alarm, when the light is on, the filter must be cleaned in time.
3.
In strict accordance with the provisions of the maintenance manual replacement air filter
cartridge.
4.
Regular cleaning bag, do not make the dust accumulation in the dust too much.
5.
In the dusty area, according to the circumstances should be cleaning the filter and replace the
filter cycle time.
6.
After the filter maintenance, attention should be paid to the correct installation, do not omit
parts, not knock the empty filter housing flat, or cannot remove the filter for maintenance and
replacement, and the dust bag should be vertical downward.
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
