Weichai America Corp.
70
8.7
Oil pan disassembly and assembly
8.7.1 Exploded view
1. Gasket 2. Oil pan 3. Support block 4. Hex flange bolt
Figure 8-7 Exploded view
8.7.2 Preparation before disassembly
1.
Equipment conditions: Socket wrenches, special tooling
2.
Disassembly Preparation: None
8.7.3 Dismantling
1.
Turn the engine, the oil pan up.
2.
Remove the oil pan fastening bolt.
3.
Remove the oil pan support block.
4.
Remove the oil pan and gasket.
5.
Remove the magnetic plug and the composite gasket.
8.7.4 Installation
The installation steps are the opposite of the dismantling steps.
8.7.5 Maintenance points
1.
Disassembly: The oil pan should be cleaned before disassembly. Place the oil container on the
oil pan under the oil drain plug, loosen the oil plug with a screwdriver, and drain the oil.
2.
Assembly: Tighten the oil pan fastening bolts in the sequence shown in Figure 4-8.7-1,
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
