Weichai America Corp.
79
10.4.3 Dismantling
1.
Remove the clamp between the LPG evaporator and the gas pipe and fix the bolt on the flange
end of the gas pipe to remove the gas pipe assembly and hose;
2.
Remove LPG evaporator inlet and outlet fittings clamp, pull out the inlet pipe and outlet pipe;
3.
Remove the connecting bolt and cushion between the LPG evaporator and the LPG
evaporator bracket and remove the LPG evaporator assembly;
4.
Remove the bolts of the LPG evaporator fixing bracket and remove the fixing bracket;
5.
Disassemble the LPG evaporator electromagnetic cut-off valve;
6.
Remove the water and air connections on the LPG evaporator.
10.4.4 Installation
The assembly procedure is the opposite of the disassembly procedure.
10.4.5 Maintenance points
1.
After disassembly and installation, you need to replace the gasket, O-type rubber ring before
installation;
2.
Check the joints, clamps are fastened well;
3.
Check LPG evaporator balance pipe is connected to the mixer;
4.
Use the leak test liquid to check the gas connections to ensure no leaks;
5.
Check the waterway interface to ensure no water leakage;
6.
Check the gas pipe for cracks and other damage, the flange is deformed, etc., there is the need
to replace the gas pipe
10.5
NG gas supply system dismantling and assembly
10.5.1 Exploded view
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
Document Courtesy of Fly Parts Guy Co.
www.FlyPartsGuy.com
