Weh TW156, Руководство по эксплуатации

Страница: 8 / 52

1�4 General safety instructions
Î
Always comply with all applicable local, national and international requirements,
stipulations, decrees, laws, standards, provisions, directives, norms, regulations,
prohibitions and instructions as well as all applicable industrial, quality and tech-
nical standards. In particular, make sure that you and all users comply with the ap-
plicable requirements related to occupational health and safety as well as product
safety requirements and that all required permissions, certificates and approvals
have been obtained.
Î These operating instructions should be provided to anyone responsible for the
installation, operation and maintenance of this WEH
®
Product.
Caution: Incorrect application poses a risk to the user's health and can cause
property damages. The consequences of incorrect application could include the
following:
- the connector or parts of the connector become loose under pressure
- media that may be under pressure, hot or toxic, can escape
- connection hoses vibrate dangerously
- The WEH
®
Product and these operating instructions are intended for use by
qualified personnel (see Chapter 1.5 ). Make these operating instructions available
in particular to the qualified personnel responsible for the individual phases of the
life cycle (especially for storage, installation, operation, inspection and mainte-
nance, troubleshooting and disposal) of the WEH
®
Product. The qualified personnel
must have read and understood these operating instructions.
Î
Contact WEH before using the WEH
®
Product if the instructions in these operating
instructions are unclear in any way.
Î Take appropriate safety measures if operating conditions exist that could endanger
the user.
Î
In case of any damage that may affect the proper functioning of the WEH
®
Product,
do not use the WEH
®
Product until the situation has been clarified. Disassembly of
the WEH
®
Product may only be performed by WEH.
Î
Comply with the assembly data indicated in these operating instructions. Tighten-
ing with higher torques/assembly turns can result in damage or even fractures
when the system is pressurized.
Î Do not use any auxiliary materials or cleaning agents other than those indicated
in these operating instructions. Using other auxiliary materials or cleaning agents
may cause damage to the WEH
®
Product or to downstream components.
- WEH is not responsible for damage caused by external forces or other external
influences.
MD-10021-L51-R2.1.0-03
Page 8
Operating instructions AE