Creation and Download the Application
Crane | 75
4 CREATION AND DOWNLOAD THE APPLICATION
In order to configure the CFW500 inverter for Crane application, it is necessary to create the ladder application
on the WLP and then download it to the SoftPLC function of the CFW500 inverter, as well as the parameter
values configured on the configuration wizard.
The following steps show how to create and configure the Crane application in the WLP and how to transfer it
to the CFW500 inverter.
NOTE!
The Crane application only works on CFW500 inverter with firmware version over V2.02.
1
st
Step: Create a new project on the WLP based on the Crane ladder standard application. For this, select
Tools, Application, CFW500, Create, Crane and finally click in an application selected;
Figure 4.1 – Create the Crane application in the WLP
2
nd
Step: Name the new project created;
Figure 4.2 – Dialog to name the new project
Содержание Crane CFW500 series
Страница 2: ......
