Wegener UNITY4650, Руководство пользователя

Страница: 49 / 92

Unity 4650 User’s Manual
wegener.com 49 800034-01 Rev. A
COMPEL-req : Values are REQ, NR, or GL. Forces COMPEL

to be tempo-
rarily required, not required, or left as normal global unit setting (respectively)
when attempting this Preset during Recovery.
tags-req :Values are REQ, NR, or GL. Forces Carrier ID Tags to be temporarily
required, not required, or left as normal global unit setting (respectively) when
attempting this Preset during Recovery.
aud1 : Language descriptor (or wildcard ‘*’) for audio stream to be assigned to
Audio port 1.
aud1_rt :
S - Stereo (left and right components routed as connected at original
MPEG encoder)
1 - Original left component to both L and R outputs
2 - Original right component to both L and R outputs
M - Sum of left and right components to both L and R outputs
R - Reverse of "Stereo" above (if allowed by hardware)
aud2 : Language descriptor (or wildcard ‘*’) for audio stream to be assigned to
Audio port 2.
aud1_rt : Same as aud1_rt above
margin : Margin offset in dB. Ranges between 0 and N dB. (See MARGIN
command for N.)
This command augments the ADDS command to populate the extended Preset
Entry. Note that if this Preset is used to acquire services (through Recovery or
user command), these temporary COMPEL and Tags-required parameters, if
used, will be adopted as the permanent global unit parameters.
ADDS location [format] [feed #] [carrier freq] [data rate] [FEC] [Tag Site]
program# [label]
location : Value from 1 up to max (highest entry #) indicating location in set-
tings table.
For format , feed # , carrier freq , data rate , FEC , tag site , program # , and label
see PERM command.
The command to add entries to the U5000-style preset table at the entry num-
ber given. If entry at location was already in use, it will be overwritten.