Wegener UNITY4650, Руководство пользователя

Страница: 27 / 92

Unity 4650 User’s Manual
wegener.com 27 800034-01 Rev. A
Rack
Mounting Your U4650 is sized at a single RU and will fit an EIA-standard, 19-inch-wide
equipment rack.
a) First install angle brackets or cross-supports capable of supporting both
the unit and its connecting cables. Screw or bolt the supports securely
to the equipment rack.
b) Place the U4650 on its supports and use four anchor screws or bolts and
nuts to secure the U4650 front brackets to the rack.
WARNING
The front brackets must be secured to the rack. If front brackets are left
unsecured, the unit may shift forward and fall from the rack during installation
or operation. Failure to secure the front brackets may result in personal injury
and/or damage to the equipment.
Desktop
Installation To set up the U4650 in a desktop environment, place the U4650 on a flat sur-
face where it will not be subject to spills or impacts. Also route cables to the
unit so that they will not be hit or pulled causing damage to the connectors or
to the unit itself. Ensure a sufficient flow of cool air (See “Reduced Air Flow”
on page 26.) so that the unit's operating ambient temperature range is not
exceeded.
WARNING
Locate the U4650 and its cables to avoid impacts, spills, and pulling cables
and to ensure sufficient air flow. Failure to locate the U4650 in a proper
environment may result in damage to the equipment.