Wegener UNITY4650, Руководство пользователя

Страница: 25 / 92

wegener.com 25 800034-01 Rev. A
Chapter 2 Installation
This chapter provides instructions on unpacking, mounting, and connecting
your U4650 as well as connector information including detailed pinouts.
2.1 Unpacking and Inspection
Carefully unpack the unit and its ac power cord and inspect for obvious signs
of physical damage that might have occurred during shipment. Any damage
claims must be reported to the carrier immediately. Be sure to check the pack-
age contents carefully for important documents and materials.
NOTE: Please save the packing materials and original shipping containers in
case you must later return the unit for repair. Packing these units in other
containers in such a way that they are damaged will void your warranty.
2.2 Location and Mounting
The U4650 may be mounted in a standard 19-inch equipment rack or set up for
desktop operation. In either location, maintain a clean, dry environment for
your U4650.
FCC-
mandated
suppression
of radiated
emissions If the Ethernet port has a cable connected to it, that cable MUST be properly
shielded and grounded. This must be done to minimize RF emissions which
could interfere with nearby equipment.
WARNING
This is a Class A product. In a domestic environment this product may cause
radio interference for which the user may need to take mitigating action.