Wega LB 4700, Руководство по эксплуатации и обслуживанию

Страница: 70 / 136

70
espresso coffee machine - user instructions
English
8.1 PROGRAMMING COFFEE DOSES
• place the programming lever (1) , located under the boiler cover of the machine,
in the ON position;
• insert a pod in the filter holder and attach it to the group, tightening firmly;
• put the coffee cup under the dispensing spout;
• press the PROG/STOP button
(2) for about 8-10 seconds; all the dose button
LEDs will come on;
• press the desired dose button (3) ;
• when the desired dose has been attained, confirm by pressing the PROG/STOP
button (2) ;
• repeat this operation for the other dose buttons;
• when finished programming, return the programming lever
(1) to the OFF
position.
8.2 PROGRAMMING CAPPUCCINO DOSES
• place the programming lever (1) , located under the boiler cover of the machine,
in the ON position;
• insert a pod in the filter holder and attach it to the group, tightening firmly;
• put the cup under the dispensing spout of the cappuccino maker;
• press the PROG/STOP button
(2) for about 8-10 seconds; all the dose button
LEDs will come on;
• press the desired cappuccino dose button (4) ;
• the delivery of coffee will begin; when the desired dose of coffee has been at-
tained, confirm by pressing the PROG/STOP button (2) ;
• delivery of milk will begin;
• when the desired dose of milk has been attained, confirm by pressing the
PROG/STOP button (2) ;
• repeat the operation for the other dose button;
• when finished programming, return the programming lever
(1) to the OFF
position.
ON
2 3
3
1
2
4
4
8. PROGRAMMING
All programming operations must be made by qualified technical personnel.
The programming of each dose must be done with a new pod and not with previously used pods
.
For machines with two groups, programming the doses of the left-hand push button panel fi rst automatically programs
the doses of the right-hand push button panel. It is, however, both possible and advisable to program the push
button panels independently, taking care to always start from the left-hand push button panel. Furthermore, if the
machine is equipped with an cappuccino maker, after having programmed the cappuccino doses on the left-hand
push button panel, the corresponding coffee doses on the right-hand push button panel must be reprogrammed
.