28
1. 1. Product description
1.1
Proper use
The wedi Sanoasa Wellness Multicentre cabins (Individual) are
ready-to-use steam showers for use in the domestic setting. They
are neither designed nor suitable for use in commercial systems.
The complete steam generator, light and shower technology is
prefabricated at the factory and built into the cabin so as to be
protected against moisture. The operator must not make any
changes to the basic condition. Changes will render these operat-
ing instructions invalid and result in loss of the CE certification and
voiding of the warranty. The prepared pipework for the shower
and steam panel may only be connected to existing cold and hot
water supply pipes on site. This work may only be carried out by
appropriately trained specialists. The power supply may only be
routed centrally in a junction box. The lighting in the cabin roof
as well as the loudspeakers must be connected into the separate
equipment room using plug-in connectors. This work may only
be carried out by appropriately trained specialists.
1.2
Constructional design
The wedi Sanoasa Wellness Multicentre cabins (Individual) consist
of various components that are assembled and connected ready
for use. The standard equipment includes the following compo-
nents:
Cabin walls
The cabin walls are made of wedi building boards. They have dif-
ferent dimensions (length x width x height) depending on the
model. The walls must be fitted with a vapour barrier on site.
The equivalent air space thickness must be at least 50 m.
Cabin floor (wedi Fundo)
The cabin floor is a floor-level shower basin with drainage system
integrated and sealed at the factory. The drains can be horizontal
or vertical. The floor base can be covered with an individual choice
of tiles following installation. The floor drain has a drainage rate
of 0.8 l/s according to DIN EN 1253.
Cabin roof
It has a coloured epoxy resin vapour barrier coating applied at the
factory.
Glass and door elements together and relevant accessories
•
The glass door of the Sanoasa Libertà,Sanoasa Esotica and
Sanoasa Porta cabins consists of a 0.3 m fixed glass element
and a 0.7 m moving glass door. The Sanoasa Agola cabin's
glass door consists of a 5-corner glass door.
All elements are made from 8 mm single pane safety glass.
•
Sealing profile for the glass door.
•
High-gloss polished recessed profiles made of anodised
aluminium for the glass and door elements.
•
Doorknob and hinges made of chromed brass.
Steam generator for the steam and shower room
•
Supply to the steam generator: 400 – 415 V 3/N/PE 6.6 KW 3 x
16A or optionally 3 x 6 mm
2
230 V 1/N/PE 6.6 KW 32A
•
Incl. steam outlet, piping and wiring within the system itself
Steam generator control unit
•
Manual on/off switch
•
Temperature setting
•
Setting for automatic activation (preselection time)
•
Code lock to protect all settings
•
Light switch (non-functional)
Shower panel for 4 side jets
•
Shower panel made of wedi building board with integral
Hansgrohe Ibox
•
1x in-wall tap
•
Piping for connection of 4 side jets
•
Piping for hand jet
Shower fittings
•
1 set of Hansgrohe fittings consisting of:
•
1 x Ecostat in-wall thermostat mixer
•
2 x Ecostat tap
•
1 x Axor Arco shower set
•
4 Bodyvette side jets
including 1 piece Fixfit hose connection
Lighting system
•
Halogen spotlights: 2x recessed steam-proof halogen lights
12 V / 20 W, white bulb
Music system
•
Vapour-proof loudspeakers, painted
•
The music system is to be provided by the operator, the system does
not have to be splash-proof as it is located outside the interior.
Optional additions or enhancements can be ordered for customi-
sation of the various models.
