WEBTEC HPM4000, Руководство пользователя

Страница: 34 / 121

34 V1.0/02/12
Instrument settings
3.3 using the SR-VaDc-1c current-voltage converter
The current/voltage converter can only be used with the analogue
version of the HPM4020 measuring instrument. Once connected,
the display will show the % value. The scale and the measurement
size can be changed using the software.
3.4 using the SR-FQc frequency converter
The SR-FQC frequency converter can be used with both versions
of the instrument. The frequency converter is configured using the
software (please refer to the converter's operating manual).
The CAN version of the instrument can detect the setting ranges
of the frequency converter and display them directly.
The analogue version has a sensor detection feature for the
setting ranges 0 to 15, 60, 150, 300, 600, 750 l/min and 0 to
10000 1/min. These are displayed directly on the instrument. All
other ranges are initially shown as a % value, but can be config
-
ured via the software.
4. Instrument settings
Some of the buttons are assigned two functions. You can
execute the second function (which is printed in grey) by
pressing the button for three seconds.
4.1 ReSet – reset the MIn and MaX values
RESET
ZERO
Resets the minimum and maximum values for all
channels.