Setting Up Websense V-Series Appliances
42
Websense V-Series Appliances
V10000 G2 and V10000 G3: Web and Email mode with Web
Security
After completing the initial configuration required by the firstboot script, use the
Appliance Manager to configure important settings for network interfaces N and E1
(E2, P1, and P2 are optional).
The P1 and P2 interfaces can optionally be bonded to the E1 and E2 interfaces,
respectively, either for load balancing or active/standby.
Primary NTP server
Optional
Be sure that interface C can access the NTP server.
If interface C does not have Internet access, you can
install an NTP server locally on a subnet that can be
accessed by interface C.
Domain:
Secondary NTP server
Optional
Domain:
Tertiary NTP server
Optional
Domain:
Choose interface for transporting blocking
information for traffic. (interface C or interface N)
If interface N transports blocking information, N
must be connected to a bidirectional span port.
Ensure that interface N has been set
up appropriately, if N will transport
blocking information.
IP address for network interface N
IP address:
Subnet mask for network interface N
Subnet mask:
Default gateway for network interface N
Required only if network interface N carries
blocking information
IP address:
Primary DNS server for network interface N
IP address:
Secondary DNS server for network interface N
Optional
IP address:
Tertiary DNS server for network interface N
Optional
IP address:
IP address for network interface E1
IP address:
Subnet mask for network interface E1
Subnet mask:
