Setting Up Websense V-Series Appliances
26
Websense V-Series Appliances
machine running Policy Server. The policy source can also be another
appliance running in either
full policy source
or
user directory and filtering
mode. In this case, enter the IP address of that appliance’s C network
interface.
c.
Click
Save
.
11.
Enable/disable TRITON Unified Security Center on this appliance
a.
If you have not done so already, in the left navigation pane, click
Configuration > Web Security Components
.
b.
Under
TRITON - Web Security
, select:
•
Off
: the TRITON Unified Security Center runs on a separate machine from
the appliance.
•
On
: the TRITON Unified Security Center runs on this appliance.
TRITON - Web Security is the Web Security module of the TRITON Unified
Security Center. For a Websense Web Security Gateway deployment, you can
choose to run the TRITON Unified Security Center on or off the appliance.
For other deployments requiring more than the Web Security module of the
TRITON Unified Security Center (Data Security or Email Security modules),
the TRITON Unified Security Center must be installed on a separate machine
from the appliance. In this case, be sure to disable it here.
12.
Click
Log Off
, at the top right, when you are ready to log off Appliance Manager
V5000 G2: Web mode with Web Security
After completing the initial configuration required by the firstboot script, use the
Appliance Manager to configure important settings for network interface N, which is
used for communication by Network Agent.
Gather the following information before running the Appliance Manager. Some of this
information may have been written on the Quick Start during hardware setup.
Note
Organizations with high traffic volume or large reporting
needs are encouraged to install and run the TRITON
Unified Security Center on a separate machine, to optimize
performance.
Primary NTP server
Optional
Be sure that interface C can access the NTP server.
If interface C does not have Internet access, you can
install an NTP server locally on a subnet that can be
accessed by interface C.
Domain:
Secondary NTP server
Optional
Domain:
