background image

45

1  Cooking grills (2)
2

Griddle

3

Flavorizer bars (11)

4

Left work surface 

5

Glides (4)

6

Phillips head 1/4-20 x 1 inch machine screws (4) 

7

Cooking box (assembly)

8

Burner control knobs (6) 

9

Igniter (3)

10 Igniter lock nut (3)
11 Igniter wire (black) (3)
12 Igniter wire (white) (3)
13 Gas catcher ignition chamber (3) 
14 Manifold mounting clips (2)
15 Manifold assembly 
16 Igniter buttons (3) 
17 Control panel
18 Front panel
19 Match holder bracket
20 Plastic button 
21 Caster frame
22 Match holder 
23  1/4-20 x 3 1/2 inch bolt (4)
24 Caster (2)
25 Bottom tray
26  Catch pan holder 
27 Catch pan
28 Drip pans (2) 
29 Accessory rack 
30 Bottom connectors (2) 

Parts List

All items are single quantities unless otherwise
specified.

Parts can be ordered directly from Weber-Stephen
Products Company by phone or mail.

Note - Do not return parts to Weber-Stephen Products
Co. without first contacting the Customer Service
Center by phone or mail. Returning the part may not be
necessary.

31 Wheel hub caps (2) 
32 Wheels (2) 
33 Wheel frame 
34 1/4-20 hex nut 
35 Cylinder glides (2) 
36 Glide axle 
37 Glide hubcaps (2) 
38 Cylinder panel 
39 1/4 inch nylon washers (12)
40 1/4-20 x 1 3/4 inch bolt
41 Splash guards (2)
42 Flavorizer bar / Cooking grill holders (2)
43 Right work surface
44 Crossover tubes (3) 
45 Left burner (3)
46 Right burner (3)
47 Top frame rail #1 (2)
48 1/4-20 x 1/2 inch bolts (6)
49 Back panel
50 Top frame rail #2 (2)
51 Plastic handle (4)
52 #8-16 x 1 inch screw (8)
53 Hose Clamp
54 1/4-20 x 5/8 screw 
55 1/4-20 wing nuts
56 Fuel scale assembly 
57 Hose / Regulator 
58 LP tank
59 Filler adapter

WARNING:

Use only Weber factory authorized parts.
The use of any part that is not factory
authorized can be dangerous. This will also
void your warranty.

While we give much attention to our products,
unfortunately an occasional error may occur. 
If a part is missing, do not go back to the store. 
Call the Weber Customer Service Center toll free 
1-800-446-1071 to receive immediate assistance. 
Have your owner’s manual and serial number 
of the barbecue available for reference.

Weber-Stephen Products Company
Customer Service Center
250 South Hicks Road
Palatine, IL  60067-6241
(847) 705-8660
(800) 446-1071

Содержание FT 600

















































Отзывы: