Weber mt 0170051, Руководство по эксплуатации и техническому обслуживанию

Страница: 9 / 28

9
Start-up procedure
Do not disperse any sprays or other agents into the air intake
while the machine is starting up. They may lead to overheating
in the combustion chamber and result in damage to the
engine.
There is danger of suffocation if the operator starts up the
machine in closed rooms or in deep and tight trenches.
Operating the machine in closed rooms is prohibited. Provide
for an adequate supply of air before starting the machine.
During operation There is a crushing hazard under the tamping foot during
operation.
The personal protective equipment will protect the toes, but not
the entire foot. Do not step under the tamping foot.
Monitor the surroundings to avoid injury to third parties or
material damage.
Suspend operation and shut down the machine if detecting
damage on the machine during operation.
Parking the machine Always park the machine on a level subsurface with sufficient
bearing capacity.
Parked machines presenting an obstacle must be secured in
accordance with statutory regulations, particularly in the area
of public traffic surfaces.
Engine and exhaust heat up during operation and can cause
burns on contact. Therefore, do not touch these components
during operation or shortly after the engine was switched off.
Fueling the machine Spilled fuel may ignite and has a negative impact on the
environment. Therefore, wipe up spilled fuel and make sure
the gas cap is firmly tightened after fueling.
Fuel vapors are easily flammable. Do not smoke and keep
away from open fire while refueling the machine.
The machine must not be fueled unless the engine is switched
off.
When coming into contact with fuels, the rubber-bonded metal
buffers of the machine may become damaged or ineffective.
Therefore, wipe spilled fuel carefully off the rubber-bonded
metal buffers.