Weber mt 0170051, Руководство по эксплуатации и техническому обслуживанию

Страница: 17 / 28

17
Compacting
WARNING
There is a crushing hazard under the tamping foot from the
movement of the tamper during compacting.
X
Wear the personal protective equipment.
X
Only guide the tamper in the grip area of the manual
guidance rod.
CAUTION
There is a crushing hazard between the tamper and the wall
during work in close proximity to walls.
X
Use extra caution when working close to obstacles.
CAUTION
If guided incorrectly, the tamper may tip over during operation.
There is a crushing hazard.
X
Guide the tamper safely with both hands in the grip area of
the manual guidance rod.
ATTENTION
Risk of material damage if the machine is guided improperly.
Pulling the machine back against its actual direction of travel
will overload, and possibly break, the guided cylinder.
X
Never pull the tamper back against its actual direction of
travel.
X
Start the engine.
X
Bring the gas lever into the full-throttle position.
X
Guide the tamper with both hands on the manual guidance
rod.
Cold start (below 5° Celsius)
If operating the tamper in temperatures below 5° Celsius, the
oil in the tamping system needs to be warmed up briefly.
To do so:
X
Start the engine and allow it to warm up at idle speed.
X
Lift the tamper.
X
Allow the tamper to run at full throttle for approx. 5 seconds.
X
Shift the engine back to idle speed.
X
Set the tamper down.