WeatherMaster Eclipse Shutters, Руководство по установке

Страница: 51 / 63

51 | P a g e
INSTALLATION FRAME ASSEMBLY FOR 3 OR 4
SIDED FRAMES
GLUING CORNER KEYS
• Apply Loctite 474 (or Contact Cement)
to outside surface of corner key.
• Frame over corner key. Hold firmly until
it is set (10 to 20 seconds).
ASSEMBLY
• Lay side frames beside the panels,
(Ensure the “Left and Right” frames are
on the correct sides.
• Insert the plastic corner keys on the top
and bottom frames first.
• Slide the top and bottom frames into
the side frames (For Recess Mounts the
Corner Keys will “Snap into Place”, but
Face Mounts will need to be glued).
(Use a small amount of Loctite as it will
be impossible to separate them if they have set).
• If minor gaps appear, use Caulk to seal the corners.
• For Deluxe Frames and Trim Frames,
install a 90-degree metal bracket at the
back of the frames, to give a tight, and
more secure assembly.
• If extensions are used:
a) L-Frame Extension slides onto the back
of the L-Frame
Note: For Bullnose Z, Deluxe Trim, and Trim
frames, in addition to the corner key, install
a 64mm x 64mm x 12mm 90°metal bracket
for a more secure corner assembly (do not
glue).