WeatherMaster Eclipse Shutters, Руководство по установке

Страница: 29 / 63

29 | P a g e
9. SECURE SIDE FRAMES IF APPLICABLE
To prevent the ends of the frames from being distorted by the frame assembly
screws, spacers are placed at each end of any frame that has adjacent side
frames. During frame assembly, the screw will pass through the top frame and
spacer, then into the side frame. Secure the side frames, plumb with the panels.
Cap the holes with button plugs.
10. ATTACH VALANCE
Attach valance brackets to the front of the frame. Once all brackets are secure,
position the channel on the back of the valance so that it rests on the bracket. The
valance will need to be on a 45 degree angle, with the bottom of the valance
further into the room. Rotate the valance down to a vertical orientation until
locked into all brackets. Returns can be attached using the same bracket or glued
in place using a corner key and loctite glue.
11. BOTTOM TRACKS
Install bottom tracks plumb with the centre of the top tracks. Use either the screws
provided or silicon along the centre of the track. Insert two spring loaded bottom
guides into the bottom of each panel and then engage into the bottom track.
SLIDING SHUTTERS - FRAME ASSEMBLY
•
Insert the provided 75mm screws though the top frame
• Line up the screw through the screw ports inside the side frames (fasten tightly)