Weather Guard 246-3-02 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 18

Weather Guard 246-3-02 Скачать руководство пользователя страница 1

1

INSTALLATION MANUAL

Aluminum & Steel Hi-Side/Super Side Boxes

Model 246-3-02 through 396-5-02

ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS

BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.

Danger of explosion. Do not use this product for storing or transporting flammables, explosives, hazardous materials, or hazardous waste,

such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Failure to heed this

warning will result in death or serious injury.

This product is only intended and safe for use in storing and transporting small tools, equipment and other similar materials. This product

can reduce the driver's ability to clearly see road-ways, vehicular or pedestrian traffic and other objects through the rear and side windows of

the vehicle, which may cause an accident. Extra precautions should be taken when driving a vehicle with this product. Make all adjustments

necessary to ensure maximum visibility, including but not limited to, changing mirror and seating positions. State and local laws may prohibit

obstruction of windows in a moving vehicle.
These instructions are to be followed using the parts and fasteners supplied for proper installation. Any modifications or improper installation

of this product will create a hazardous condition that could result in death, serious personal injury and/or property damage. All floor mounting

bolts near the fuel tank area should be installed from the underside of the vehicle, to guard against the fuel tank being punctured in the event

of a collision. This would mean not using Blind Fasteners in this area. Holes in this area should be 5/16". Ensure ample space in roof ribs and

sidewall ribs for mounting screws so as not to puncture exterior roof or wall.
Do not install this product where it could interfere with deployment of air bags. Failure to comply could result in death or serious body injury.

WARNING

DANGER

WWW.WEATHERGUARD.COM

TRUCK STORAGE SOLUTIONS

– NOTICE –

Any modification or unintended use of this product shall immediately void all manufacturers warranties. Manufacturer disclaims all liability for

injuries to persons or property resulting from any modification to, or unintended use of this product.

CAUTION

Prior to drilling, so as not to cut electric wires, fuel lines, brake lines, etc., check behind and underneath drilling and mounting locations. To

keep debris out of your eyes when checking the underside of the vehicle, or when drilling, always wear protective eye wear. Failure to heed

this warning may result in moderate injury.

SECURING YOUR REPUTATION

®

Part No. 24-0295

REV. B ECN

5305 04/13

PRODUCT REGISTRATION

Model#

________________

Serial#

__________________

Purchased Date:

______________________

Place of purchase:

______________________

Key Code:

______________________

For your convenience,

place product

registration tear-off

sticker here.

1
2
3
...
»

Содержание 246-3-02



















Отзывы:

Нет отзывов