Basics
Houseport
®
Window Layout Information
5
The number below corresponds to the red numbers above:
1.
Design
and
Control
operation selection. Activate
Design
to create and manipulate the
network. Activate
Control
to operate the devices in the network. The
Design
operation
mode outlines the window in a yellow and black construction tape border.
2.
Add Device
and
Remove Device
buttons are active in Design operation mode only.
3.
Draw Rooms
button is active in
Design
operation mode only.
4.
All on
and
All off
controls for Z-Wave
®
modules when in
Control
operation mode only.
5.
Schedules
button used to open the Schedules window to review, create, or remove
scheduled events.
6. Scene list shows all current scenes. Click on the triangle to reveal/hide the
Z-Wave
®
modules in the scene.
7. Add, remove and manipulate scene buttons.
8. Plan view area with a multi-room floor plan created via the Draw Rooms tool or
imported floorplan.
9. example of a dimmable light module that is currently off.
10. example of an appliance module that is currently on.
11. The ‘test scene’ scene is selected with connecting lines visible to highlight the
Z-Wave
®
modules contained in that scene.
