Pico
™
on-the-go car seat
INSTRUCTION MANUAL
39
38
Pull free ends of harness straps to snugly adjust
harness straps so that shoulder belt webbing cannot
be pinched with fingers to fold webbing:
Check that harness straps are snug on shoulders and thighs.
A snug strap should not allow any slack. It lies in a relatively
straight line without sagging. It does not press on the child’s
flesh or push the child’s body into an unnatural position.
Buckle chest clip and position chest clip at arm pit level.
NOTE
:
When attached, shoulder strap pads
MUST sit on top of child’s shoulders.
NOTE: Should
Roll both harness strap ends up
and secure with the webbing loops.
REMOVAL OF CHILD FROM PICO
Press release button and pull apart .
Release buckle by pressing red
button and pulling tongues out.
Pinch Test
WARNING
• If harness cannot be snugly adjusted as
described above, DO NOT use this car seat.
2
1
1
2