Wavtech Link6 Скачать руководство пользователя

Страница: 3 / 12

Introduction

Welcome to Wāvtech, exceptional mobile audio integration products for audiophiles. Our products are
engineered to provide a truly remarkable listening experience. Built for the professional installer, our
OEM integration and signal processor models are simply the best solution available for unlimited sound
system upgrades while retaining the factory receiver.

Power Indicator: This red LED indicates
when the link6 is powered on. Once
illuminated, there will be a short delay
before audio signal output is enabled.
During initial power connection, the
LED may illuminate for a brief period.

Auto Turn-On Detect Jumpers: By
default, the link6 is set to detect
both DC-oﬀset and audio signal for
turning itself on/oﬀ automatically.
These jumpers allow either mode to
be independently defeated for cases
where only one turn-on mode is
preferred or to bypass both modes

when a sw12V trigger is available and connected to the REM IN terminal.

Power Supply Terminal:

For +12V battery, chassis ground, remote input and remote output wire

connections. A minimum of 18AWG wire is recommended for power and ground connections. Always
protect the +12V power wire with a 1-amp fuse.

Speaker Level Input Terminals: For up to six channels of speaker level input connections to the source.
Input signals ranging from 2Vrms to 20Vrms will produce up to 10Vrms RCA output from maximum to
minimum gain. For factory ampliﬁers with more than 20Vrms signal or if the link6’s output is too high
for the connected aftermarket ampliﬁer(s) with all gains at minimum, internal jumpers are available to
reduce the input sensitivity range by half (-6dB) for 4Vrms up to 40Vrms.

Auxiliary Input Jack: This 3.5mm stereo AUX input is for the connection of a portable device such as a
smartphone or MP3 player, but may also be used for other low level (a.k.a line level) sources using a
3.5mm adapter. AUX may be selected as a separate source via the multi-function remote, or
programmed as the primary source for stand-alone systems where the speaker level inputs are not
used (see pg4). Input signals ranging from 0.5Vrms to 5Vrms will produce up to 10Vrms RCA output at
maximum to minimum gain setting. This input is diﬀerential but may be set to unbalanced via internal
jumpers (labeled BAL/UNBAL) if required for a particular source.

‘

CH1/2 Output Select: This switch allows CH1/2’s output to be selected between 1/2 for direct input
pass-through (default) or 5/6 to copy signal from CH5/6 internally after its summing stage. The latter
is particularly useful when summing 3-way systems for retaining remote level control over CH5/6
while also providing a separate summed full-range output from CH1/2.

’

RCA Output Jacks: These six channels of RCA outputs are for signal connection to your

ampliﬁer(s). For a speaker level source, output from CH3/4 and CH5/6 will depend upon their

respective INPUT CH settings (see pg3), while CH1/2 is set by its output select switch (see

‘

above).

For an AUX source, left/right stereo signals will be routed to all output pairs. Use quality
interconnects to ensure stable connections and minimize the possibility for induced noise.

“

Remote Level Control Jack: This RJ45 jack is for connecting the multi-function remote to the main
unit with the supplied cable. A standard ethernet cable may also be used.

”

Mounting Tabs: These mounting tabs are for securing the link6 during installation with screws or
cable ties. They are removable if the unit can be safely secured by another method.

Connections & Functions

6-Channel Line Output Converter

6-Channel Summing Processor

Multi-Function Remote

Master Volume

AUX Volume

Independent CH5/6 Level

Source/Function Select

AUX 3.5mm Input

Diﬀerential Balanced Inputs

Low Impedance Outputs

Variable Gain Adjustments w/Clip LEDs