wavin minipek, Инструкции по установке, использованию и обслуживанию, Страница: 4 / 12

MiniPEK 02BI01_ee
WAVIN-LABKO OY 4(12)
2 MINIPEK SAND, OIL AND FUEL TRAP
2.1 Operating principle
The MiniPEK trap collects water from
the designated area and then leads it
to further processing. The trap
separates sand, oil and other solids
from the water. The products must not
be used on vehicle washing sites.
2.2 Structure
MiniPEK traps are floor drains made
from PE plastic. The trap includes a Ø
300 cover, a separate, easily emptied
sludge bucket, and a tight Fix lock
®
outlet fitting and an inlet fitting
equipped with a drain trap. In addition,
the trap has two reinforcement bar
installation cogs that can be used to
attach the trap to the concrete
reinforcements of the floor before
casting. Delivered in a protective
cover bag that prevents spatter from
sticking to the cover during casting.
The traps can be equipped with an oil
tank filling alarm.
MiniPEK 0.2 MiniPEK S 0.4 MiniPEK 0.4 MiniPEK 0.6
1 Frame PE PE PE PE
2 Cover Ø300
Rainwater,
B125 (C250)
Solid,
C250
Rainwater,
B125 (C250)
Rainwater,
B125 (C250)
3 Outlet fitting D110 D110 D110 D110
4 Slot for an inlet
fitting D110 D110 D110 D110
5 Sludge bucket Ø 260 H = 240
–
Ø 260 H = 240 Ø 260 H = 240
6 ACCESSORY:
Oil alarm
If ordered If ordered If ordered If ordered
V1
Oil and fuel
separation tank
110 l 220 l 220 l 330 l
V2
Sand and sludge
storage capacity
40 l
–
80 l 120 l
hL
Outlet fitting
elevation
250 300 300 300
h Inlet fitting
elevation
220 270 270 270
H1 Overall height 640 700 840 1,100
W Width 600 750 750 750
L Length 800 1,060 1,060 1,060
Image 1 and table 1. Structure of the MiniPEK traps.