Wavetek ANT-20, Руководство по эксплуатации

Страница: 75 / 126

ANT-20/ANT-20E Broadband Analyzer/Generator
Application Guide A-11
B) Entering the address of the called instrument
✓
The “Test - Setup <...>” dialog is open.
✓
The instrument is configured for SVCs.
1. Click the “Change Address” button.
The “Address Input” dialog window opens.
Fig. A-17 The “Address Input” dialog
2. Select the address format, e.g. Native E.164.
3. Select the type of code number, e.g. International.
4. Select the type of numbering plan, e.g. ISDN.
5. Set the address or dialling number (without 0 prefix).
The maximum number of digits is shown under “Length”.
6. Click the CLOSE button to confirm the address.
This returns you to the “Test - Setup <...>” window.
C) Changing the source parameters, e.g. Peak Cell Rate
a) Click the arrow key to increase the parameter value in decades.
– or –
b) Click the arrow key to decrease the parameter value in decades.
c) Open the list box if the units are to be changed, and select the appropriate list entry (e.g.
kbps).
Fig. A-18 Changing the source parameter
2.
3.
5.
4.
b
a
c