4-34
4.3.6 Editing a Reverse Sweep Plan
If desired, the selected Reverse Sweep Plan can be viewed and
modified.
IMPORTANT: You should verify that none of the sweep points
contained within the Reverse Sweep Plan will
interfere with existing carriers on the reverse plant.
Press the
Edit
soft key to display the following screen:
This screen shows a list of sweep points contained within the se-
lected Reverse Sweep Plan. The list consists of the sweep point
number followed by the frequency of the sweep point. Use the up
and down arrows to scroll through the list.
Note that the frequency of the selected sweep point also appears in
the edit box below the list. You can change the frequency by using
the numeric keys followed by the
ENTER
key. The list will be
updated when the
ENTER
key is pressed.
To remove a sweep point, use the up or down arrow to select the
point to be removed, then press the
Delete
soft key.
