Waveshare WIFI-LPT100-B, Руководство пользователя, Страница: 46 / 60

WIFI-LPT100-B User Manual
46 / 60
ap's ssid
：
AP’s SSID (Within 32 character);
23) AT+WSKEY
➢
Function: Set/Query STA security parameters. Setting is valid after reset.
➢
Format:
Query Operation:
AT+WSKEY<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
Set Operation:
AT+ WSKEY=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
➢
Parameters:

Auth: Authentication mode

OPEN

SHARED

WPAPSK

WPA2PSK

Encry: Encryption algorithm

NONE: When “auth=OPEN”, effective

WEP-H: When “auth=OPEN” or “SHARED”, effective
，
HEX format

WEP-A: When “auth=OPEN” or “SHARED”, effective
，
ASCII format

TKIP: When “auth= WPAPSK” “WPA2PSK”, effective

AES: When “auth= WPAPSK” “WPA2PSK”, effective

Key: password, when encry = WEP-H, the password is the hexadecimal
number, must be 10 bytes or 26 bytes; When encry = WEP-A, the password is
the ASCII code, must be 5 bytes or 13 bytes; other ASCII code, shall less than
64 bytes and greater than 8 byte.
24) AT+WANN
➢
Function: Set/Query STA network setting. Setting is valid after reset.
➢
Format:
Query Operation:
AT+WANN<CR>
+ok=<mode,address,mask,gateway><CR>< LF ><CR>< LF >
Set Operation:
AT+ WANN=< mode,address,mask,gateway ><CR>
+ok<CR>< LF ><CR>< LF >