Waveshare WIFI-LPT100-B, Руководство пользователя, Страница: 38 / 60

WIFI-LPT100-B User Manual
38 / 60
46 NTPEN Enable/Disable time calibration function
47 NTPTM Query time
48 NTPSER Set/Query NET server and time zone
Other Command
49 WRMID Set module ID
50 ASWD Set/Query search keywords in LAN
51 WAPM S et if MAC is following AP’s SSID
52 MDCH Set Wi-Fi Auto Switch Function
53
REGENA
Set/Query Registration Packet and its mechanism
54
DTTY
S et/Query Registration Packet’s mechanism
55
PING
Network PING command
56 SEARCH Set/Query module search port
57 SMTSL Set/Query smart networking type
58 USERVER Query version and time
59 RPTMAC Query if MAC report function is enable
60 WRRPTMAC Set MAC report function
61
HEARTEN
Set/Query Heartbeat Packet function
62
HEARTTP
Set/Query Heartbeat Packet transmit way
63
HEARTDT
Set/Query Heartbeat Packet data
64
HEARTTM
Set/Query Heartbeat Packet transmit interval
1) AT+E
➢
Function: Open/Close show back function;
➢
Format:
AT+E<CR>
+ok<CR>< LF ><CR>< LF >
When module firstly switch from throughput mode to command mode, show back
status is open, input “AT+E” to close show back function, input “AT+E” ag ain to open
show back function.
2) AT+WMODE
➢
Function: Set/Query Wi-Fi work mode (AP/STA/APSTA). Setting is valid after reset;
➢
Format:
Query Operation:
AT+WMODE<CR>
+ok=<mode><CR>< LF ><CR>< LF >
Set Operation:
AT+ WMODE=<mode><CR>
+ok<CR>< LF ><CR>< LF >
➢
Parameters :
Mode: WI-FI work mode