
WIFI-LPT100-B User Manual
39
/
60
AP
STA
APSTA
3) AT+ENTM
➢
Function:
Set module into throughput mode;
➢
Format:
AT+ENTM<CR>
+ok<CR>< LF ><CR>< LF >
After operate this command, module switch from command mode to throughput mode.
4) AT+TMODE
➢
Function:
Set/Query module data transfer mode. Setting is valid after reset.
➢
Format:
Query Operation:
AT+TMODE<CR>
+ok=<tmode><CR>< LF ><CR>< LF >
Set Operation:
AT+TMODE=<tmode><CR>
+ok<CR>< LF ><CR>< LF >
➢
Parameters:
Transparent: transparent mode
cmd: command mode
5) AT+MID
➢
Function:
Query module ID information
➢
Format:
AT+MID<CR>
+ok=<module_id><CR>< LF ><CR>< LF >
➢
Parameters
:
module_id: module ID information
WIFI-LPT100
Notes:
User can set this parameter through AT+WRMID
6) AT+RELD
➢
Function:
module restore to factory default setting.
➢
Format:
AT+ RELD<CR>
+ok=rebooting…<CR>< LF ><CR>< LF >