Wavecom W40PC, Руководство пользователя

Страница: 42 / 264

34
•
Install & Uninstall WAVECOM Decoders v6.15 W40PC, W41PC, W51PC
W51PC TCP Remote Control
The W51PC uses Microsoft TCP to communicate between the W51PC card (W51PC server)
and the user interface (W51PC client).
This structure allows a number of W51PC cards to be remotely controlled from a single PC.
Selecting a W51PC card for remote control is simply done using the Setup menu.
When not using remote control, the operating details remain unchanged
W51PC DCOM Remote Control
The W51PC uses Microsoft DCOM to communicate between the W51PC card (W51PC
server) and third parties applications.
Computer#1 Computer#2
W51PCCardA
IW51System
IUnknown
DCOM Server
Control
DCOM
Remote Control
WAVECOM
Server TCPIP
TCPIP
Client Application W51GUI
W51GUI
Client Application
TCP/IP
W51PC Starting a mode
After the W51PC software has been started, all software for the two W51PC on-board processors is downloaded.
The download duration is approximately one second or two and the progress of the operation is
displayed as
"Init..." .
Installation is now completed and the W51PC is ready for use. From the "HF-Modes" or
"VHF/UHF-Modes"
menus a mode may be selected.
W51PC Command Line Parameters
You can passs some information to the application by adding some comand line parameters.
The following commands are accepted:
/i inifilename
The name of the ini file located in the same directory as the W51PC. Additionally also a path
can be used.
or
/n cardnumber