Wave Wireless Networking SPEEDLAN TM 6000, Руководство оператора

Страница: 48 / 50

SPEEDLAN TM
48
Note : Click Select to view the IP Mask List. Select the appropriate IP Mask and click OK .
6. Click OK .
7. After you have finished entering the appropriate information, click OK .
8. Now save the changes to the bridge or router. From the File menu, choose Save Config .
9. A message box appears informing you that the information will be saved to the bridge or router.
Click Yes .
10. The Configurator confirms that the configuration has been saved. Click OK . Restart the computer.
Note: NAT is a useful tool that will be enabled the majority of the time on the client or satellite side
of the SPEEDLAN ISP or SPEEDLAN MP. It is rarely enabled on the base unit. NAT is also
useful to have private networks connected to public networks (i.e., the Internet) without needed a
public IP address for every node. By using only one pulbic IP address, NAT controls who in the
private network made a request to an address in the public network. This translates the IP
addresses from one side to another, hiding the private network from the public. This means that the
public will view only one public and valid IP address.
5. Enter the appropriate outgoing information:
•
Public IP Address – This is the IP address for the outside network. If you have more than one
public address, you can assign it to node on a private network (One-to-One NAT). Therefore,
all requests for a particular IP address from the outside or public network will be translated to
the appropriate private IP address. This may be necessary if you have a server or workstation
(computer) that needs to be connected to a remote network.
•
Private IP Address – This is the IP address for the inside or private network only, which hides
behind the Public IP address.
•
Public IP Mask – This address assigns the Subnet mask to the Public (Ethernet) portion of the
SPEEDLAN unit.
•
Private IP Mask - This address assigns the Subnet mask to the private network interface.